mud mixing hopper manual control
PRM's Mixing Hopper is tailored for drilling fluid preparation, featuring custom shaker options engineered for efficiency and reliability.
View productcomposite shaker screensupplier and shaker screen manufacturer. Choosing the right D380 replacement depends on shaker model, deck opening, and drilling-fluid environment — not just a part number. This selection hub pulls PRM’s D380 Composite Shaker Screen details into one place, from the reference size No.1181×712mm to compatibility with NOV Brandt D380 and D285P systems, so you can compare composite versus traditional screens before sending an RFQ. Request a direct quote from composite shaker screen supplier with the frame data above; as a, PRM builds its composite line to handle demanding drilling conditions.
A lightweight, corrosion-resistant composite frame and mesh replacement screen that is listed for demanding drilling-fluid solids-control duty.
PRM’s official product listing identifies this screen both as D380 Composite Shaker Screens and D380 Composite Replacement Shaker Screen. The core construction pairs a durable composite frame with composite mesh, and the product page describes a design that is lightweight yet robust enough for demanding drilling conditions.
A side-by-side starting point. The D380 composite column reflects official PRM product-page statements; the traditional column is editorial and will vary by actual shaker and operating conditions.
| Evaluation Factor | D380 Composite Shaker Screen | Traditional Shaker Screen (Editorial) |
|---|---|---|
| Frame & material | Durable composite frame and mesh construction; corrosion-resistant composite material suited to moisture, chemicals, and high salinity. | Conventional steel or fibreglass frames with various mesh attach methods; performance depends on build quality, coating, and tensioning. |
| Weight & handling | Lightweight yet robust composite design that supports easier deck handling during changeouts. | Often heavier; handling burden depends on frame type, screen size, and installation position. |
| Drilling-fluid compatibility | Officially listed as suitable for both oil-based and water-based drilling fluids. | Compatibility varies with mesh type, bonding, seals, and manufacturer recommendation — always check with your shaker OEM or screen maker. |
| Wear resistance & service life | Extended wear resistance and operational life are stated product benefits on the D380 page. | Replacement interval is application-dependent; abrasive solids, tension loss, and flow rate all affect life. |
| Solids separation | High-efficiency filtration with optimized solids separation for high-performance solids control. | Separation results depend on mesh cut point, shaker motion, G-force, and fluid properties. |
| Maintenance & downtime | Reduced maintenance costs and reduced downtime are stated as benefits of longer composite screen life. | Maintenance burden varies by field conditions; downtime is also driven by logistics, access, and crew experience. |
Editorial note: Use this table to shortlist replacement options, then confirm fit with PRM before ordering. Field performance always depends on shaker settings, mud characteristics, and solids loading.
Route your RFQ correctly by answering three practical questions: shaker model, mud system, and deck opening.
If you run a NOV Brandt D380 or D285P shaker, PRM’s gallery labeling identifies the D380 composite screen as the replacement composite screen for those systems. For other shaker brands, use your frame model as the first filter in your RFQ.
Check the D380 listingThe D380 composite screen is listed as suitable for both oil-based and water-based drilling fluids. If your site also brings moisture, chemical exposure, or high salinity, the corrosion-resistant composite construction becomes directly relevant.
Describe your mud environmentPRM states the D380 is available in multiple sizes, with No.1181×712mm shown as a reference size on the product page. If your opening matches that dimension, name it in the quote; if it does not, send your measured width, length, and frame type.
Send your dimensions to PRMBring your shaker model, mud type, deck size, and target quantity to the quote request. PRM can help you validate the reference size and route you to the correct D380 configuration.
PRM structures its D380 screen purchase path around industrial procurement: you request current pricing, confirm size and compatibility, and then buy from the source behind the product line — without an extra distributor layer in your RFQ.
Submitting these details gives the PRM team what it needs to confirm a D380 composite configuration instead of replying with another round of spec questions.
Keep adjacent product options together for a faster catalog comparison.
PRM's Mixing Hopper is tailored for drilling fluid preparation, featuring custom shaker options engineered for efficiency and reliability.
View product
API RP 13C CertifiedCore Advantages🔥Highest Non-Blank Area in ClassOptimized mesh geometry delivers 92% effective screening area18% higher than standard screens for rapid fluid re
View product
prm’s d380 composite shaker screens — also called the d380 composite replacement shaker screen on the official product page — use a durable composite frame and mesh construction for high-efficiency filtration in oil and gas drilling. the listing shows a visible reference size of no.1181×712mm and states the screen is suitable for both oil-based and water-based drilling fluids.
prm’s product gallery labels the d380 composite screen as a replacement composite screen for nov brandt d380 and d285p shaker systems. if you run another brand or model, compare your deck opening and frame type against the multiple available sizes before sending your quote request.
according to prm’s product page, the d380 composite shaker screens are suitable for both oil-based and water-based drilling fluids. the composite material is also corrosion-resistant, supporting use in moisture, chemical, and high-salinity environments.
the prm product page states the d380 screen is available in multiple sizes. the visible reference size is no.1181×712mm, so if your existing screen or deck opening uses that dimension, it is the clearest first data point to include in your rfq.
open the official d380 product page and click the “get the latest quote” button. you can also use the prm contact us page. include your shaker model, mud type, screen size or reference dimension, and estimated quantity so the team can respond with a spec-matched quotation.
prm lists extended wear resistance and operational life, reduced maintenance cost and reduced downtime, high-performance solids control, and corrosion resistance among the d380 composite screen benefits. the lightweight yet robust composite design also supports easier handling during changeouts.